Nortel Networks Nortel Secure Network Access Switch 4050 Manuel d'utilisateur télécharger pdf (Page 899)

100

101

Appendix F Configuring DHCP to auto-configure IP Phones 899

Nortel Secure Network Access Switch 4050 User Guide

5 Configure VLAN Information:

a In the Scope Options dialog box (see Figure 248 on page 897), select

191 VLAN Information.

b In the String value field, enter the following string:

VLAN-A:vvvv.

Table 211 describes the parameters.

The site-specific option #191 pertains to the VLAN ID information that

the IP Phone will require in order to boot into the Phone VLAN.

The following rules apply:

— A colon (:) separates the hardware revision from the VLAN ID.

— The string must end in a period (.)

c Click Apply

6 Click OK.

7 Repeat step 1 on page 896 through step 6 to configure the options for the

Phone VLAN.

Setting up the IP Phone

In order for the IP Phone to take advantage of the DHCP auto-configuration

features, set the IP Phone up as follows:

1 Set the DHCP Option on the IP Phone to

1 to use DHCP.

2 Select

0 to set the phone to use FULL DHCP.

3 Select

2 (for Automatic) to set the phone to learn its VLAN ID from the

DHCP server.

Table 211

VLAN ID Information string parameter values

Parameter Description

A The hardware revision of the IP Phone

vvvv The VLAN ID in decimal

1 2 ... 894 895 896 897 898 899 900 901 902 903 904 ... 921 922

Commentaires sur ces manuels

Pas de commentaire

Nortel Networks Nortel Secure Network Access Switch 4050 Manuel d'utilisateur Page 899

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Nortel Networks Nortel Secure Network Access Switch 4050