Nortel-networks Server 1005r Manuel d'utilisateur télécharger pdf (Page 16)

16 Chapter 2 1005r server description

PCI riser card (turned over)

CAUTION

Risk of physical equipment damage

Remove the 1005r from the rack, and place it on a solid surface

when replacing or adding cards. The PCI riser assembly requires

considerable force when inserting it into the connector, and

physical damage can result if the assembly is not properly aligned.

When you place the server on a solid surface such as a

workbench, you have a better view of the card alignment, and

you can exert the necessary force when inserting the assembly

into the connector.

ATTENTION

If The PCI riser assembly must be fully seated to avoid server malfunction.

Valid PCI card conﬁgurations

Introduction

There are six PCI card slots; three low-proﬁle and three full-size. Valid

conﬁgurations of low-proﬁle and full-size cards are shown in the table "1005r

PCI card slot conﬁgurations" (page 17).

Nortel CallPilot

1005r Server Hardware Installation

NN44200-308 01.06 Standard

5.0 15 May 2008

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Pas de commentaire

Nortel-networks Server 1005r Manuel d'utilisateur Page 16