Nortel Networks 24T Manuel d'utilisateur télécharger pdf (Page 133)

Installing the BayStack 410-24T Switch

309985-B Rev 00

2-19

Figure 2-14. IP Configuration/Setup Screen (Standalone Switch)

Enter the IP address of the switch in the In-Band IP Address field, then

press [Return].

Enter the IP subnet mask address in the In-Band Subnet Mask field, then

press [Return].

Enter the default gateway address in the Default Gateway field, then

press [Return].

Proceed to Chapter 3, “Using the Console Interface,” for detailed descriptions of

the menus and screens you can use to customize your configuration.

Note:

When the IP address is entered in the In-Band IP Address field, and

the In-Band Subnet Mask field is not present, the software provides an

in-use default value for the In-Band Subnet Mask field, based on the class

of the entered IP address.

IP Configuration/Setup

BootP Request Mode: [ BootP Disabled ]

Configurable In Use Last BootP

------------------- --------------- ---------------

In-Band Stack IP Address: [ 0.0.0.0 ] 0.0.0.0

In-Band Switch IP Address: [ 0.0.0.0 ] 0.0.0.0

In-Band Subnet Mask: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0

Default Gateway: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0

IP Address to Ping: [ 0.0.0.0 ]

Start Ping: [ No ]

Use space bar to display choices, press <Return> or <Enter> to select choice.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 309 310

Pas de commentaire

Nortel Networks 24T Manuel d'utilisateur Page 133