Nortel-networks Mediant TP-1610 SIP Manuel d'utilisateur télécharger pdf (Page 82)

Mediant 2000 SIP

Mediant 2000 SIP User’s Manual 82 Document #: LTRT-72504

Figure 5-35: ‘End Process’ Screen

9. Click the End Process button; the ‘Quick Setup’ screen appears and the full Web application

is reactivated.

5.11.2 Auxiliary Files

The ‘Auxiliary Files’ screen enables you to load to the gateway the following files: CAS, Call

Progress Tones, Voice Prompts and Prerecorded Tones (PRT). For detailed information on these

files, refer to Section

7 on page 135. For information on deleting these files from the Mediant

2000, refer to Section

5.10.4 on page 77.

Table

5-10 presents a brief description of each auxiliary file.

Table

5-10: Auxiliary Files Descriptions

File Type Description

CAS Up to 8 different CAS files containing specific CAS protocol definitions.

These files are provided to support various types of CAS signaling.

Voice Prompts The voice announcement file contains a set of Voice Prompts to be played by the

Mediant 2000 during operation.

Applicable only to the VXML application.

Call Progress Tones This is a region-specific, telephone exchange-dependent file that contains the

Call Progress Tones levels and frequencies that the VoIP gateway uses. The

default CPT file is: U.S.A.

Prerecorded Tones

The dat PRT file enhances the gateway’s capabilities of playing a wide range of

telephone exchange tones that cannot be defined in the Call Progress Tones file.

 To load an auxiliary file to the gateway, take these 8 steps:

1. Open the ‘Auxiliary Files’ screen (Software Upgrade menu > Load Auxiliary Files); the

‘Auxiliary Files’ screen is displayed.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 279 280

Pas de commentaire

Nortel-networks Mediant TP-1610 SIP Manuel d'utilisateur Page 82