Nortel-networks Mediant TP-1610 SIP Manuel d'utilisateur télécharger pdf (Page 214)

Mediant 2000 SIP

Mediant 2000 SIP User’s Manual 214 Document #: LTRT-72504

G.1.1 Converting a CPT ini File to a Binary dat File

For detailed information on creating a CPT ini file, refer to Section 7.1 on page 135.

 To convert a CPT ini file to a binary dat file, take these 10 steps:

1. Execute the TrunkPack Downloadable Conversion Utility, DConvert240.exe (supplied with

the software package); the utility’s main screen opens (shown in Figure G-1).

2. Click the Process Call Progress Tones File(s) button; the Call Progress Tones screen,

shown in Figure G-2, opens.

Figure G-2: Call Progress Tones Conversion Screen

3. Click the Select File… button that is in the ‘Call Progress Tone File’ box.

4. Navigate to the folder that contains the CPT ini file you want to convert.

5. Click the ini file and click the Open button; the name and path of both the ini file and the

(output) dat file appears in the fields below the Select File button.

6. Enter the Vendor Name, Version Number and Version Description in the corresponding

required fields under the ‘User Data’ section.

7. Set ‘CPT Version’ to ‘Version 1’ only if you use this utility with a version released before

version 4.4 of the device software (this field is used to maintain backward compatibility).

8. Check the ‘Use dBm units for Tone Levels’ check box. Note that the levels of the Call

Progress Tones (in the CPT file) must be in -dBm units.

9. Click the Make File button; you’re prompted that the operation (conversion) was successful.

10. Close the application.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 279 280

Pas de commentaire

Nortel-networks Mediant TP-1610 SIP Manuel d'utilisateur Page 214