Nortel Networks Network Card 4400 Manuel d'utilisateur télécharger pdf (Page 53)

Chapter 6 CLI Procedure for Creating a Node Profile

Getting Started with Passport 4400, Release 4.1

Defining Node ID

To define a node ID, use the following CLI command:

CLI> define msm profile nodeID

Example:

CLI> define msm profile nodeID 23

If you don’t want to modify any more parameters in this window, go to “Saving

the Current Configuration and Resetting the Unit” on page 54, or continue with

“Defining Customer ID” on page 53.

Defining Customer ID

To define a customer ID, use the following CLI command:

CLI> define msm profile customerID

Parameter Range of Value Required Action

<NodeID> INTEGER (1..65535) Enter an integer between 1 and

65535. If your network uses node

IDs to identify Passport 4460 units,

be sure to assign each unit a unique

node ID.

Note:

The element msm signifies the MPANL signal mechanism. The

customer ID is expressed as an integer between 0 and 65535. The terms

MPANL and PANL both refer to the same protocol and may be used

interchangeably.

Parameter Range of Value Required Action

<CustomerID> INTEGER (0..65535) Enter an integer between 1 and

65535.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 73 74

Pas de commentaire

Nortel Networks Network Card 4400 Manuel d'utilisateur Page 53