Nortel-networks NB5PLUS4/W Manuel d'utilisateur télécharger pdf (Page 85)

YML754 Rev1 NB5Plus4/W User Guide

www.netcomm.com.au 85

3. Enter Encyption key and select Cipher following instructions on screen. You will

need to enter the same key for the rst time conguration of each station

4. To save your settings, refer to the section above.

Following is a description of the WEP eld settings.

Option Description

Eable WEP

Wireless Security Check this eld to enable WEP wireless

security.

Autheticatio Type Authentication algorithm to use when

the security conguration is set to

Legacy. When the security conguration

is set to 802.1x or WPA, the authentica-

tion algorithm is always open. This eld

is enabled when the WEP security eld

is checked. There are three options:

• Open: In open-system authentication,

the access point accepts any station

without verifying its identify.

• Shared: Shared-key authentication

requires a shared key (WEP encryp-

tion key) be distributed to the stations

before attempting authentication.

• Both: If both is selected, the access

point will perform shared-key authen-

tication, then open-system authentica-

tion.

Ecryptio Key This eld is enabled when the WEP

security eld is checked. The key’s value

that is used when the security congu-

ration is set to legacy. The key length

must match the WEP cipher. This eld is

not used when the security congura-

tion is set to 802.1x or WPA.

WEP Cipher This eld is enabled when the WEP

security eld is checked. You can select

from 64 bits, 128 bits, and 256 bits.

The WEP cipher that is used when the

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 111 112

Pas de commentaire

Nortel-networks NB5PLUS4/W Manuel d'utilisateur Page 85