Nortel-networks M3310 Manuel d'utilisateur Page 81

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 264
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 80
Digital Telephone IP Adapter Installation and Administration Guide 81
January 2005 Installing the Digital Telephone IP Adapter unit
Powering up the Digital Telephone External IP Adapter unit
As soon as you connect the Digital Telephone External IP Adapter unit to the
power source, the unit begins to power up.
During power-up, the Digital Telephone External IP Adapter unit performs a
self-test. The power LED flashes three times to verify all critical functionality,
including:
! RAM memory test
! Flash checksum validation
If the Digital Telephone External IP Adapter unit completes a successful self-
test, the telephone display shows one of the following messages:
! A time and date, if connected to a PBX.
! HOSTLESS MODE, if not connected to a PBX.
Note: The ETHERNET TX and RX LEDs flash only in response to transmit and
receive activity.
Vue de la page 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 263 264

Commentaires sur ces manuels

Pas de commentaire