Nortel-networks 911x Series Manuel d'utilisateur

Standard 1.1Part No. N0027496January 2005Remote Gateway 911x SeriesQuick Start Guide

10 ConfigurationP0918963Standard 1.1Note: If, at any time while working with the telephone set menu, you make a mistake, you can return to the previou

2N0027496Standard 1.1Copyright © 2001-2005 NortelAll rights reserved.The information in this document is subject to change without notice. The stateme

3Remote Gateway 911x Series Quick Start GuideStandard 1.1PrefaceCongratulations on your purchase of the Remote Gateway 911x series unit. With the Remo

4PrefaceP0918963Standard 1.1

5Remote Gateway 911x Series Quick Start GuideStandard 1.1InstallationYou need a 10BaseT Ethernet cable to provide the Remote Gateway 911x series unit

6 InstallationP0918963Standard 1.15 Secure the circuit card to the footstand with the two screws provided.6 Plug the 18 cm (7 inch), TCM cable into th

Installation 7Remote Gateway 911x Series Quick Start GuideStandard 1.14 Close and latch the ferrite bead.Note: You may need to adjust the cable loops

8 InstallationP0918963Standard 1.1To connect the Remote Gateway 911x series unit to the power source as follows:1 Connect the plug on the power transf

9Remote Gateway 911x Series Quick Start GuideStandard 1.1ConfigurationYou can configure the Remote Gateway 911x series unit through the telephone set.