Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Manuel d'utilisateur télécharger pdf (Page 43)

Chapter 2 Cabling the VPN Router and turning the power on 43

Nortel VPN Router Installation — VPN Router 2700

The following table describes the LEDs on the 1000BASE-T (1000 GT) Ethernet

interface card.

1000BASE-T (1000 MT) Ethernet interface card LEDs

Figure 12 shows the LEDs on the 1000BASE-T (1000 MT) Ethernet interface

card.

Figure 12 LEDs on the 1000BASE-T (1000 MT) Ethernet interface card

Table 8 describes the LEDs on the 1000BASE-T (1000 MT) Ethernet interface

card.

Table 7 LED indicators on the 1000BASE-T (1000 GT) Ethernet interface card

LED Indicator Description

ACT/LINK Steady green The port is connected to a valid link partner.

Flashing green The card is sending or receiving network data. The

frequency of the flashes increases with increased

traffic.

Off The card is not sending or receiving data.

10/100/1000 Yellow The port is operating at 1000 Mb/s.

Green The port is operating at 100 Mb/s.

Off The port is operating at 10 Mb/s.

Table 8 LED indicators on the 1000BASE-T (1000 MT) Ethernet interface card

LED Indicator Description

ACT/LNK Steady green The port is connected to a valid link partner.

Flashing green The LAN port is sending or receiving network data.

Off The port is not linked to a valid partner.

11287EA

10 = OFF

100 = GRN

1000 = ORG

ACT/LNK

Intel PRO

10/100/1000

ACT/LNK

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 107 108

Pas de commentaire

Nortel Networks Nortel Contivity Secure IP Services Gateway 2700 Manuel d'utilisateur Page 43