Nortel-networks Passport 8001PS Manuel d'utilisateur Page 1

Part No. 204519-BApril 20004401 Great America ParkwaySanta Clara, CA 95054Installing the Passport 8001PS AC Power Supply

ii Copyright © 2000 Nortel Networks All rights reserved. April 2000.TrademarksNORTEL NETWORKS and Passport are trademarks of Nortel Networks. All othe

1About this GuideThis guide provides the following information:• Operational notes• Instructions for installing a Passport 8001PS AC Power Supply in a

2 Installing a Power SupplyRequired tool: Phillips screwdriver1. If necessary, remove the filler panel from a power supply bay.2. Push the power suppl

35. Turn on the power switch.8964FANote: In a chassis that requires more than one power supply (see “Operational Notes”), you must turn on both units

4 3. Loosen the retaining screws. 4. Lift the extractor lever to disconnect the power supply from the backplane. Pull the power supply out of the chas

57. Connect the power cord to the power supply and to a power outlet that is on a circuit with no other equipment connected to it.Connect each power s