Nortel Networks 8672ATME Manuel d'utilisateur télécharger pdf (Page 129)

Chapter 6 Configuring the Passport 8672ATME Module 129

Using the Passport 8672ATME Module

Bridging point-to-multipoint traffic using an ATM 1483 PVC

using the CLI

To configure two ATM 1483 bridged PVCs using the CLI:

1 To create two VLANs by port, enter:

config vlan 2 create byport 1

2 To add ATM port (1/1) and some Ethernet ports (3/40-3/48) into the VLAN,

enter:

config vlan 2 port add 1/1, 3/40-3/48

3 To create a 1483 Null-encapsulation UBR PVC, enter

config atm 1/1 pvc create 0.100 ecn 1483-null serv

ubr

Or create a 1483 Null-encapsulation VBR PVC.

config atm 1/1 pvc create 0.100 enc 1483-null serv

vbr<PCR value>scr<SCR value> mbs<MBS value>

4 To associate the two 1483 bridged PVCs with the same VLAN, enter:

config atm 1/1 pvc 1483 bridged create 2 0.100,

0.101

The Passport 8672ATME Module directs the two ATM 1483 bridged PVCs to two

different ATM ports on the other end.

Configuring an IP routing 1483 PVC using Device Manager

In the configuration shown in Figure 55, the Passport 8672ATME Module has an

ATM 1483 PVC as the sole member of a VLAN configured for IP routing.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 161 162

Pas de commentaire

Nortel Networks 8672ATME Manuel d'utilisateur Page 129