Nortel Networks 703t Manuel d'utilisateur télécharger pdf (Page 51)

October 2006 Installing the server and connecting the peripheral devices

703t Server Hardware Installation 51

To set the modem DIP switches

Use a pair of tweezers or a small screwdriver to set the DIP switches as

described in the “Change to” column of the following table:

Note: ON is down. OFF is up.

DIP

switch

Default

setting

Change

to Function

1 OFF OFF Data Terminal Ready (DTR) override

 OFF: Normal DTR operations. (The

computer must provide a DTR signal for the

modem to accept commands. If DTR is

dropped, the call is terminated.)

 ON: The modem ignores DTR (override).

2 OFF OFF Verbal/numeric result codes

 OFF: Verbal (word) results.

 ON: Numeric results.

3 ON ON Result code display

 OFF: Suppresses result codes.

 ON: Enables result codes.

4 OFF OFF Command mode local echo suppression

 OFF: Displays keyboard commands.

 ON: Suppresses echo.

5 ON ON Auto answer suppression

 OFF: The modem answers on the first ring

or later, as specified in user-defined

nonvolatile memory (NVRAM).

 ON: Disables auto answer.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 71 72

Pas de commentaire

Nortel Networks 703t Manuel d'utilisateur Page 51