Nortel Networks Network Router BCM 4.0 Manuel d'utilisateur télécharger pdf (Page 35)

Chapter 4 Connection and configuration procedures 35

BCM 4.0 Installation Checklist and Quick Start Guide

To connect through the serial port

1 Attach the null modem cable to the serial port on the BCM main unit.

2 Attach the other end of the null modem cable to the serial port on the terminal or computer.

3 Ensure that the BCM main unit and your terminal or computer are turned on.

4 Access the BCM main unit using one of the following methods:

a If using a terminal emulation program (Hyperterminal), attach a configuration computer to

the BCM main unit serial port (recommended method).

b If you are accessing the BCM main unit through your local area network through SSH

(secure socket shell), use the default IP address 10.10.10.1.

5 When prompted for a User ID, type:

nnadmin

6 When prompted for a Domain, press <ENTER>.

7 When prompted for a Password, type:

PlsChgMe!

8 The Configuration main menu screen appears. Refer to Figure 11.

Figure 11 Configuration main menu screen

Note: The location of the transmit (TX) and receive (RX) pins on your terminal can vary.

Refer to your terminal or computer documentation to confirm pin locations.

10 minutes

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Pas de commentaire

Nortel Networks Network Router BCM 4.0 Manuel d'utilisateur Page 35